|
|
|
Specifications:
|
|
All specifications subject to change without notice.
|
|
Wire Sizes
|
|
Double index capability for #26 through #4 AWG
terminal crimping
|
|
Speed
|
|
Over 3600 pieces per hour with speed change capability
|
|
Dies
|
|
Quick change dies crimp a full range of insulated and
non-insulated terminals from 26 through 4 AWG wire sizes.
|
|
Mode
|
|
Can be operated manually or in automatic mode
|
|
Air
|
|
Requires normal 80-105 psi shop air
|
|
Reels
|
|
Terminal crimping reels are top-mounted on an integral
support bracket
|
|
Reel Size
|
|
1000 pcs, 2500 pcs, 5000 pcs (dependent upon terminal
size)
|
|
Voltage
|
|
110 VAC, 60Hz, 2Amp (standard)
|
|
OPERATION
|
Automatic Mode
The foot pedal is held down continuously, and
stripped wire ends are inserted into terminal. Sensor activates
machine only when wire is in exact position, providing best possible
crimp. Permits unskilled labor to use the machine.
|
Manual Mode
The operator places stripped wire end in the
terminal between the crimping jaws and depresses the foot treadle.
Foot treadle actuates the crimping jaws.
|
Terms
H270 units may be leased. Contact Hollingsworth
for details.
|
|
|
|
|
|
|
|
|
FAST
The H270 operates as fast as
your fastest operator can insert stripped wire ends.
FOOLPROOF
Dies
are held in place with just two screws. Precise, built-in, foolproof die
alignment -- you can't insert them wrong.
TROUBLE-FREE
Smooth-operating,
problem-free
ejector
mechanism ejects crimped
terminals.
Machine is virtually jamproof
|
