Call Us: 800-638-8376 | Email: HSTsales@hollingsworth.com

Hollingsworth Has a New Home!

July 17, 2017 by  
Filed under Blog

The team at Electro-Term/Hollingsworth is very excited to share some awesome news about our company.  In May 2015, we purchased a new home for our business. Our address is:

50 Warehouse Street
Springfield, MA  01118

In addition to the purchase, we constructed a dedicated building to house our stamping department, which affords an even greater opportunity for growth and expansion.

This is a major accomplishment in the achievement of our vision. We want to thank all of our customers and suppliers for your continued support and blessing.

We have truly been blessed to be in our new home!

While you are at it, visit our online products: Hollingsworth Popular Products Online or check out our Technical Solutions Catalog: Hollingsworth Technicals – Solderless Terminal Solutions Catalog.

1/0 to 4/0 Large Lug Capacity

July 17, 2017 by  
Filed under Blog

DID YOU KNOW …

Hollingsworth offers a LARGE LUG LINE1/0 to 4/0 range. Standard plating options include Tin, Nickel, and Gold. Custom plating specifications are also available.

These terminals are made from pure copper for highest conductivity. Standard plating is electro-tin to assure corrosion resistance. Serrated “V” grooves in the barrel of each terminal firmly grip the wire to assure maximum holding power. Flared Entry Nylon Insulation is available and dyed to standard commercial specifications. Stud sizes range from 1/4″ to 3/4″. To see a sampling of our lugs, click here.

Hollingsworth also manufactures the tooling to crimp these large lugs. Our Hollingsworth H30 and H40 are heavy-duty pneumatic crimp tools that can be hand-held or bench mounted – the perfect solution for loose piece applications. Our Hollingsworth H880 Crimp Press provides efficient bench-top automation to the crimp process – the perfect solution for High Volume requirements.

Let us know how we are doing by joining our email list. You can sign up on the Contact Us page to receive product updates, product releases, and blog postings. We look forward to Getting Connected.

How to crimp without splitting the terminal

July 14, 2017 by  
Filed under Blog

Have you ever had the problem where your terminals split during the crimping process?

Insulated terminals, when crimped with the correct tool, rarely split during the crimping process. However, Non-insulated, non-brazed terminals (NIT), can be split by a variety of factors, producing a bad termination. This can be frustrating, since a bad termination means cutting off the terminal and recrimping with a fresh terminal or redoing the entire process from scratch. Usually the cause for the split of a NIT could be one of the following:

· tool indentor is applied to the barrel seam, rather than the back of the barrel during crimping
· improper tool air pressure,
· incorrect part orientation in the tool
· incorrect tool
· incorrect wire size for the terminal.

To prevent splits, first verify the wire range of the terminal against the size of the wire that you are crimping. Attempting to crimp a terminal onto wire of the incorrect size, be it too small or too large, will always produce a poor crimp. Too small does not allow enough contact space between the wire and the terminal. Too large means a poor fit for the wire into the terminal, and too much contact for the terminal. Hollingsworth stamps the wire range on each of its solderless terminals.

Second, verify the tool being used to crimp the terminal is the correct size and type for that particular terminal. Hollingsworth tools are clearly marked with the wire size next to the crimp nests as well as being marked for NIT, FIT, FIIG, etc. A tool that crimps insulated terminals will not properly crimp non-insulated terminals.

Orientation of the terminal within the tool is always key to a good crimp. Hollingsworth hand tools create indentor style crimps, which means that the tool pushes an indentor into the terminal to create the crimp. It is imperative that the barrel seam face away from the indentor (or opposite), otherwise the force from the indentor will create an opening at the seam.

Hollingsworth crimp presses do not use an indentor to create the crimp, but instead create a confined hex crimp through the use of matched dies. Terminals are adhered to a tape, which feeds the terminals through the press, at the same time correctly positioning them to be crimped. Correct orientation of the tape through the press ensures correct orientation of the terminal within the press crimp area. The tape must be fed through press with the open barrel of the terminal facing up.

Air powered tools, such as Hollingsworth H270 crimp presses, require the correct psi. Too much psi, and you have too much force, which can cause damage not only to the terminal, but to the machine as well. Not enough psi, and you will have a poor crimp which will not pass the pull test.

Let us know how we are doing by joining our email list. You can sign up on the Contact Us page to receive product updates, product releases, and blog postings. We look forward to Getting Connected.

Welcome!

June 22, 2017 by  
Filed under Blog

Hello!
And welcome to the Hollingsworth website and our Did You Know blog! We’re glad that you found us and hope this is the beginning of a great relationship.

You may wonder about the name for our blog, “Did You Know”. We want to be a resource for you and decided that a blog with quick tips, product releases, and product/plant capabilities would fit the bill. Hopefully, we can offer some insight into some of the challenges you may have experienced, and can help you going forward.

Let us know how we are doing by posting a comment below. Or, you can submit a request through the Contact Us page to receive product updates, product releases, and blog postings. We look forward to Getting Connected.